EASY ASSEMBLY AND APPLICATION; It does not need control switches, Pressure sensors and screen connection cables are ready for installation. It is sufficient to make an electrical connection only. All materials used in the system comply with EMC - Low - CE - Rosh standards and also comply with military (MIL-DTL-26482, MIL-C-26482 standards).
HIGH BRIGHTNESS IN DAYLIGHT; PROVIDES 10” COLOR DISPLAY; 10-inch color screen, which is not found in any control system, and hardware-software that provides high brightness in daylight. Ability to monitor screen pressures as real BAR. In addition, it is possible to see the load as a percentage on the screen within the determined limits. On-screen usage performance report display system. For example, the usage times tracking system between 90-100% performance,
CERTIFIED ELECTRONIC SYSTEM WITH PROVEN RELIABILITY; EMC - LVD - CE - INSPECTION
CE: CE is the certification of the conformity of the manufactured product to the EU common market. A product bearing CE also has the right of free circulation in the EU market. What carries the product to CE is the new approach decrees supported by standards. With these published standards, the necessary conditions for ensuring life safety are defined.
LVD: It is to determine the procedures and principles regarding the safety rules and conformity assessment procedures required for the supply of electrical equipment within the scope of the LVD Regulation to the market after providing the safety requirements and conformity assessment procedures in this Regulation. The scope of the LVD directive includes electrical equipment designed to be used at rated voltages ranging from 50 Volts to 1000 Volts for alternating current and between 75 Volts and 1500 Volts for direct current.
EMC: Electromagnetic Compatibility (EMC) Directive determines the basic requirements to be applied to all electrical and electronic devices that may disrupt other devices or be affected by other devices. The essential requirements specify that the maximum electromagnetic interference effects created by the device cannot prevent the use of the following devices. National radio and television receivers, industrial production equipment, mobile radio equipment, mobile radio and commercial wireless telephone equipment, medical and scientific instruments, information technology equipment, household appliances and electronic household goods, air and sea radio (radio) equipment, electronic training equipment , telecommunications networks and equipment, radio and television broadcast transmitters, lamps and fluorescent lamps and other devices must be constructed in such a way that they can have sufficient electromagnetic immunity in ordinary electromagnetic environments. In order for the products to be supplied to the market in EU countries and in our country, CE marking must be made appropriately.
Inspection: Includes Inspection Certification, CE Certification and Technical File Approval service.
MEMORY AND WARRANTY PERIOD TRACKING; Ability to record all data up to 6 years (to record angles and pressures in bar) System to monitor and report periodical maintenance of the machine over the working hours (for example, follow-up of the lubrication time of the table gear, change of cestamide, etc.) Follow-up of the warranty period (following the working time to be determined by the manufacturer company) )
GPS-GSM MODULE; Internal location determination GPS-GSM module via satellite tracking system and e-mail sending of operator usage reports to the machine owner Reporting every 10 minutes Turkish language support and easy-to-read reporting system
LIMIT EXCEEDED NOTICE; Machine cutting-protection system in case of over-limit and emergency. - Ability to follow the dual-axis ground slope on the screen with the built-in angle sensor on the system. (At the time of use of the machine, you can see situations such as slip, collapse and foot sinking on the screen and warning system)
WARNING AND WARNINGS; Real-time auto-updating clock support. (RTC) Audible warning system in case of machine overload and breach-risk.
VISUAL DISPLAY; Media display system on the screen in case of bulk purchase and agreement Crane load diagram, maintenance and training visuals, product catalog, company introduction etc. add feature.
Easy assembly and application (does not need control switches) Pressure sensors and screen connection cables come ready for installation, you just need to supply electricity.
ADVANTAGES OF GREEN ELECTRONIC CONTROL SYSTEM
- Easy assembly and application (does not need control switches) Pressure sensors and screen connection cables come ready for installation, you just need to supply electricity.
- 10-inch color screen, which is not found in any control system, and hardware-software that provides high brightness in daylight.
- Certified electronic system with proven reliability EMC - Low Voltage - CE - RoHs
- Military Standard Connector cable connectors (MIL-DTL-26482, MIL-C-26482)
- Ability to follow screen pressures as real BAR (real manometer pressure). In addition, it is possible to see the load on the screen as a percentage within the determined limits.
- Capable of recording all data up to 6 years (recording angles and pressures in bar)
- Real-time auto-updating clock support. (RTC)
- Machine cut-off protection system in case of over-limit and emergency.
- The ability to follow the dual-axis ground slope on the screen with the built-in angle sensor on the system. (At the time of use of the machine, you can see situations such as slip, collapse and foot sinking on the screen and warning system)
- Internal location determination GPS-GSM module, tracking system via satellite and sending operator usage reports to the machine-business owner by e-mail (reporting every 10 minutes), Turkish language support and easy to read-understandable reporting system.
- The system of monitoring and reporting the periodic maintenance of the machine over the working hours (for example, the lubrication time of the table gear, the change of cestamide, etc.)
- Warranty period tracking (following the working time to be determined by the manufacturer)
- On-screen usage performance report display system. For example, 90-100% performance tracking system, (in hours, minutes, seconds)
- On-screen media display system in case of bulk purchase and agreement; Crane load diagram, maintenance and training images, product catalog, company introduction etc. add feature.
- Audible warning system in case of machine overload and violation-risk.
- Optional wireless camera tracking system